Includes cables to the paddle and transmitter. Length: 36" - Transmitter section, 30" Microphone section.Email for pricing information on completely assembled and custom length cables. Specify 4 (VKC-4) or 8 (VKC-8) pin microphone connectors. The wires to these connectors come pre-stripped and tinned for quick and painless final assembly to match the pin out requirements for your particular equipment. The VKC-4/8 cables provide the connection between the VK-64 and your rig and microphones. Rear Panel Connectors & Controls Power: Center positive Transmitter and Microphone Audio: DB9 Computer: DB25 CW Paddle: 1/8" Stereo Phono CW Out: RCA Phono Audio Level Adjust: Trim pot adjust
XDAX RUMLOGNG VOICE KEYER SOFTWARE
Power: 12V DC, 500 ma Audio Messages:4 messages, 15 seconds each CW Output keying: Solid state, for positive keyed rigs only Software compatibility: N1MM Logger, CT, NA, TR-LOG The VK-64-DX comes without a power supply for stations that use a different power connectors or otherwise want to supply their own 12VDC.
XDAX RUMLOGNG VOICE KEYER MANUAL
Adding computer control only needs a standard 25 pin shielded computer cable between theĬables are not included, but can be easily made according to directions in the manual orĪ 12V wall transformer with US standard 2 prong plug is included with the VK-64. Transmitter, even when the VK64 is powered off.ĬW set up is as simple as plugging your paddle into the VK-64. Microphone audio and PTT signals pass through the VK-64 and connect directly to the Plug the microphone into the VK-64's microphone input cable. Installing the VK-64 is easy! Unplug the microphone and plug the VK-64's transmitter audio/PTT cable The VK-64 is compatible with the major contest logging programs, including N1MM Logger, NA, WriteLog, TRLog, CT and LogEQF. The delay time can be adjustedįrom approximately 1/2 to 12 seconds with a front panel control. Message 1 for both CW and voice modes can be set up for auto repeat. Logging programs support sending CW through the printer port.Ĭomputer keying works in parallel with the internal CW keyer. The VK-64 also includes a built in LPT CW interface. A front panel knob adjusts speed from 8-45 WPM. The CW portion is an iambic memory keyer with four programable messages, each one capable of storing over 300 Morse characters. Messages are stored in non-volatile memory, remaining stored until recorded over with a new message. Press the stop button when you are finished. Press the record button followed by a message number button and start talking. The voice keyer section has four 15 second messages.
XDAX RUMLOGNG VOICE KEYER PC
You can operate the VK64 manually with the front panel controls or under program control through your PC or laptop's printer port. The VK-64 is a voice keyer and CW memory keyer in the same package! This is a legacy product and is no longer available. There is an option to print the decoded text (blue) from K3 or KX3 CW or RTTY decoders.Unified Microsystems: W9XT VK-64 Combo Voice Keyer/CW Memory Keyer and more for ham radio operators! If the option Type ahead is selected, you have to press Space bar or Enter to start CW. When the window has the focus, all entered text will be sentt to the CW keyer. To use the keyboard for CW, open the CW Tools window: Menu–>Window–>CW Tools. Please note, that these memories do not work when you are using the Contest Window because contests have separate memories that must be configured using Menu–>Contest Preferences. The CW speed is adjustable via Menu–>CW by 2 wpm up or down. Go to Preferences–>CW–>Software CW memories to edit them. This will allow you to use the RUMlog ‘software’ memories.
To use the internal keyer, you have to select Transceiver as CW interface in Preferences–>CW. Please note that ICOM radios do not allow CW memory playback to be started using software. To start the playback use Menu–>CW or press the according F-key. The transceiver’s internal memories will be used only when there is no usable internal CW keyer. To play back a memory, you have to select Transceiver as the CW interface in Preferences–>CW. You can read all the memories from the transceiver at once, and save them back one by one. This feature can be used independently of the CW interface setting and it works over the CAT interface. This menu item is active only if the selected transceiver supports it. To edit the memories use: Menu–>Transceiver–>Edit CW memories. Some transceivers may have a CW memory keyer. Only some transceivers include a CW keyer that can be controlled via the CAT protocol. This section describes the CW functionality provided by the transceiver.
0 kommentar(er)
